|
Step 1: To ensure proper placement, match 6 loose peel & stick hook strips to the 6 sewn on loop strips on the top of your ezShade®. |
|
Step 3: Raise pocket allowing the ezShade® to touch the ground by a minimum of 1 to 2 inches.
|
|
Step 2: Peel the backing from the loose hook strips and attach ezShade® to the interior edge of your umbrella or canopy. Press firmly to ensure the entire hook strip adheres fully to the fabric. Avoid touching the sticky side of the hook strips so as not to interfere with adhesion. Carefully remove curtain, leaving sticky hook strips attached to your umbrella or canopy. For best results wait 8 hours before use.
|
|
Step 4: Place a small amount of sand, water bottles, books, or other lightweight objects into the bottom pocket to keep the ezShade® from blowing in the wind.
|
|
Step 5: Convenient roll up strap.
|
Helpful Hints: In windy conditions, we recommend that you weight the pocket before attaching the ezShade® to your umbrella or canopy.
When detaching the ezShade® be sure to leave the affixed sticky hook strips on your umbrella or canopy so that your ezShade® can be used in the future. Replace sticky hook strips when adhesive wears off. Additional Velcro® hook strips can be purchased from your local fabric store.
ezShade® comes with extra peel and stick hook strips so you can easily reposition your ezShade® as the sun moves. Add more ezShade® panels to block reflected sun.
